The CP test-station SKIP – 102-2,4 is intended for the equipment of control and measuring points in field conditions. It is made from the steel pipe. The bottom part of a pipe represents a steel square for fixing the SKIP in a ground and for prevention of spontaneous lowering. The top part is made as the box with contacts panel. As additional application, it may be equipped a special cover-board for a spelling of special marks and special chassis for installing BDR-25 block on it. In the bottom part of a column there is an aperture for a supply of a cables. The external surface of a pipe and all metal parts of box are protected by a powder coating.
Also, the SKIP-102-2,4 may be equipped by the “KATRON-PIKET” controllers, for remote control of the protective potential.

CHARACTERISTICS OF THE SKIP-102-2,4:

Internal diameter, not less, mm	102
Height, not less, mm	2400
Quantity of contacts on the panel, pieces measuring power (up to 100 A DC)	1 – 16 1 – 8
Mass, no more, kg	30

Description example:

SKIP-102-2,4-3/2P Y1 – the CP test-station with 3 measuring contacts an 2 power contacts